DNA Trike Axle Conversion Kit 1 1/2" 70 Tooth Pulley Belt Drive Harley Chopper

Description

BRAND NEW
PART #
M-AX-2007
1 1/2" BELT 70 TOOTH PULLY
Auction is for a axle with a pulley for use with a belt.
For 2006-older touring models, you need a 1 1/2" 65 tooth pulley.
Our pumpkin is vented, which not only allows for better cooling, but allows debris to fall out.. With others if a rock kicks up in the pumpkin off the chain or belt it is trapped there to destroy your internals as well as damaged your belt.. Over time the pumkin traps all the garbage and will need to be disassembled and cleaned.. Not Ours...
Get them while you can..
We are a licensed manufacturer and will gladly answer any questions you may have.
Pumpkin is made of lightweight aluminum and axle from steel so you can weld on any fender mounts if you choose.
Open Slip-Differential to help when making turns and disassembles with ease. Very easy to service. We took ours apart to have it powdercoated and it went back together with ease.
COMES WITH THREE (3) DIFFERENT BOLT PATTERNS
5 ON 4.5 / 4.75 / 5
5 lug 4.75" Wheel pattern found on common Chevy wheels. (Shown with 15" x 10" Cragar)
Comes assembled with disc brakes (2 rotors & 2 piston calipers)
1 1/2" BELT 70 TOOTH PULLY
37.5" Width rotor to rotor.
42.5" Overall length
24.5" center to center of clamps.
Tech note:
We recommend using lugs from NAPA M12-1.5 X 36MM Part no. 5 # 641-3132 (You'll need 2 boxes)
Tech note:
This is not a direct bolt on. Requires swingarm. Auction is for axle with rotors & calipers only as pictured.